Donner DEK-610S Gebruikershandleiding - Pagina 15
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Donner DEK-610S. Donner DEK-610S 16 pagina's.
Pagina afdrukkenIMPORTANT SAFETY INSTRUCTIONS
1. Read and heed these instructions.
2. Do not use this product near water.
3. Clean only with a dry cloth.
4. Check the voltage of your local mains supply.
5. Do not block any ventilation openings. Install under the manufacturer's instructions.
6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
7. Only use attached merits/accessories specified by the manufacturer.
8. Unplug this product during lightning storms and long-time disuse.
9. Refer all servicing to qualified service personnel.
10. Please always turn down the volume and turn off all the units before making any connections to prevent malfunction
and equipment failure.
IMPORTANT NOTES
Do Not Tear Down
• This product does not contain user-serviceable parts. Do not attempt to disassemble or modify the internal parts in any
way.
Placement
• Do not place the product in an unstable position or a location with excessive vibration, where it might accidentally fall over
and cause injury.
• Do not use the product in a confined and poorly ventilated location.
Installation
• Do not install this product on a carpet or rug.
• Make sure the top surface faces up rather than installed on its sides or upside down.
• Before moving the product, please remove all connected cables.
Power
• Do not overload wall outlets and extension cords as this can result in a risk of fire or electrical shock.
• Unplug the product during lightning storms or when unused for long periods of time.
• Refer to the manufacturer's operating instructions for power requirements. Be advised that different operating voltages
may require the use of a different line cord and/or attachment plug.
Handling and Maintenance
• Do not place vinyl, plastic, or rubber objects on the product, since this might cause alteration or discoloration of the panel.
• When cleaning the product, use a dry and soft cloth. Do not use paint thinners, solvents, cleaning fluids, or chemically
impregnated wiping cloths since this might cause alteration or discoloration.
FCC STATEMENT
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits setforth for an uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Precautions
13