Americana Grills 9350 Series Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Americana Grills 9350 Series. Americana Grills 9350 Series 17 pagina's. Cart electric barbecue grills, two side tables, wireleg shelf, window, rotisserie kit spit, forks, bracket & motor

Pagina afdrukken

ROTISSERIE LOCK TO HOOD/BOWL ASSEMBLY

Insert a 10-24 x 1/2 inch Bolt (1) through the hole between the hood hinges and the electric heating element.

Attach Rotisserie Lock (4) to the Bowl (FIG E). Thread Acorn Nut (5) onto Bolt until the ﬂ at side of the lock

contacts the inside surface of the Grill. You may need pliers to hold the Acorn Nut. The Rotisserie Lock must

remain in contact with the inside surface of the Grill as it is rotated upward, but should fall freely when released.

To release Reﬂ ector Pan and Heating Element from the vertical Rotisserie position, rotate the Handle Control

clockwise slightly to release the pressure from the Rotisserie Lock. Lift Rotisserie Lock up with left foreﬁ nger and

rotate Handle Control back to horizontal element position. (FIG F)

WINDOW ASSEMBLY

Open Hood and lay Window Glass (25) into window recess. (FIG G)

Insert Carriage Bolt (3) from outside of Hood through hole and install Window Retainer Clip (7) on Bolt. The long

ﬂ ange of the Retainer Clip should be against the Window Glass. Put Wing Nut (8) on Bolt, Tighten with ﬁ ngers

until snug.

NOTE: DO NOT OVER TIGHTEN

Repeat for the other side. Window assembly should look like (FIG H) when complete.

CAUTION: This is a heat resistant tempered glass. Take care not to drop water on hot glass.

Carriage Bolt

FIG E

(FIG G)

Turn Handle

Control Clockwise

Long

Flange

(FIG H)

(FIG F)