Astonica 50105395 Gebruiksaanwijzing - Pagina 2

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Astonica 50105395. Astonica 50105395 2 pagina's. Santa fe bistro table

Pagina afdrukken
PARTS & HARDWARE LIST
PART #
DESCRIPTION
A
Tabletop
B
Legs
C
Small Support Ring
Large Support Ring
D
6mm x 30 Bolts
E
6mm Hex Nuts
F
G
Plastic Umbrella Cap (pre-installed)
A
C
E
Carefully remove the contents from the package.
If any parts are missing do not attempt to use the product until
they have been obtained and correctly installed.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
Caution: Do not over tighten fasteners.
QUANTITY
1
4
1
1
16
16
1
B
D
F
G
ASSEMBLY INSTRUCTIONS
1. (See figure 1) Place the table top (A) upside
down on a non-scratching surface.
2. (See figure 2) Insert each leg (B) into the
pastic sleeves located underneath the
tabletop (A).
3. (See figure 3) Insert the small support
ring (C) between the legs (B) near the
tabletop (A) and secure it to (1) leg (B)
with (2) 6mm x 30 bolts (E) and secure
with (2) hex nuts (F). Repeat this with
the other (3) legs.
(Do not completely tighten bolts.)
4. (See figure 3) Attach the large support
ring (D) near the bottom of the legs (B),
in the same manner as Step 3.
(Do not completely tighten bolts.)
5. (See figure 4) Turn table assembly right
side up on a level surface, then tighten the
bolts (D).
Figure 1.
A
Figure 2.
B
A
Figure 3.
E
D
B
F
E
C
F
A
Figure 4.