AmeriGlide AMGHERC600-6 Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AmeriGlide AMGHERC600-6. AmeriGlide AMGHERC600-6 12 pagina's. Vertical platform lift

Pagina afdrukken

P/N: 610-00018 RevC 11819

TROUBLESHOOTING & MANUAL OVERRIDE

Troubleshooting

In case of power failure, this lift is equipped with a Manual Override Crank that

permits it to be raised or lowered by hand. Before using, check to ensure that the

manual system is required.

Before using the Manual Override Crank, try trouble-shooting by verifying the

following:

Check that the Emergency Stop Switch is pulled out.

•

Check that the electrical cord is plugged into the electrical outlet.

•

Check that the building's circuit breaker has not tripped.

•

Try to run the lift by pushing both the up and down buttons.

•

Manual Over-Ride Procedure

If, after Troubleshooting as above, the lift still will not run, complete the following

steps:

Step 1

Unplug the lift from the

electrical outlet. Push in the

Emergency Stop Button.

WARNING: Do not service

or operate the Manual

Override Crank while

the lift is connected to

electricity.

For your safety, if you have any questions, please contact your installer, or the

Technical Service Department at 1-866-378-6648.

Step 2

Loosen the screws and

remove the top cap at the

top of the tower.

Hercules II 600 Vertical Platform Lift Owner's Manual | www.Ameriglide.com | 866-378-6648

Step 3

Insert the manual hand

crank onto the upper nut on

the top of the drive screw.

Rotate the crank to raise or

lower the platform.

WARNING: Never operate

the lift while the Manual

Override Crank is inserted

into the lift.

7 //