Acer XB271HU Snelstarthandleiding
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Acer XB271HU. Acer XB271HU 3 pagina's.
Ook voor Acer XB271HU: Snelstarthandleiding (8 pagina's)
Pagina afdrukken
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1.
To clean the LCD monitor screen:
f
Turn off the LCD monitor and unplug the power cord.
f
Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2.
Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely
damage it.
3.
Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4.
Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform
servicing of any nature.
5.
Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor
outside this range may result in permanent damage.
6.
Immediately unplug your monitor and call an authorized technician if any of the following circumstances
occur:
f
Monitor-to-PC signal cable is frayed or damaged.
f
Liquid spills onto the LCD monitor or the monitor is exposed to rain.
f
The LCD monitor or case is damaged.
Package contents
LCD
Power cord
monitor
Attaching the monitor to the base
1.
Remove the monitor from the packaging.
2.
Attach the footstand to the base. (for selected models)
3.
Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
4.
Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected
models)
Connecting your monitor to a computer
1.
Turn off your computer and unplug your computer's power
cord.
Connect the signal cable to the DP (optional)
2.
input socket of the monitor, and the
socket of the graphics card on
output
the computer. Then tighten
cable connector.
3.
Connect the USB Cable(Optional)
Connect the USB 3.0 cable to port for fast charge.
Connect the USB 3.0 cable to port.
4.
Insert the monitor power cable into the power port at the
back of the monitor.
5.
Plug the power cords of your computer and your monitor
into a nearby electrical outlet.
G‐SYNC Experience:
G‐SYNC requires an NVIDIA GeForce GTX650Ti BOOST GPU or higher. For more
information, visit the nVidia
DP cable
(optional)
DP (optional)
the thumbscrews on
the signal
®
website: http://www.nvidia.com/page/home.html
USB cable
Quick start
(optional)
guide
USB3.0 port
-supporting
fast charge
USB3.0 port
USB