Astor-Bannerman Rio Gebruikershandleiding en installatie-instructies - Pagina 5

Blader online of download pdf Gebruikershandleiding en installatie-instructies voor {categorie_naam} Astor-Bannerman Rio. Astor-Bannerman Rio 17 pagina's. Height adjustable bath

Daily maintenance (before using bath):
• Check the bath is permanently connected to a 230v mains electrical supply.
• Check there are no obstructions above or below the bath when in operation.
• Check the tub will raise and lower properly using the handset.
• Check the temperature of the water in the tub before use.

Instructions for use:

Before using, check that the bath will raise and lower using the
handset and the electrical supply is turned on.
Filling the tub:
Ensure the water temperature is correct when filling the bath and
before the client enters the tub.
Adjusting the height of your bath:
The bath is operated with a two button handset. Pressing one of
the buttons will either raise or lower the bath as required.
Tap options:
Thermostatic mixers taps. TMV2 compliant.
• Rotate the temperature knob until it has reached the preset
temperature.
• Depressing the red button and rotating the knob further will
increase the water temperature up the system (boiler)
temperature.
• Lift the spherical button to divert the water to the shower.
• For the flow rate, rotate the flow rate knob anti-clockwise
until desired flow rate has been achieved.
Thermostatic mixer taps. TMV3 compliant.
• Use the large center knob to control the water temperature
for both bathing and showering.
• Rotate the knob anti-clockwise to increase the temperature
to the preset temperature for both bathing and showering.
The bathing temperature will be 3°c hotter than the preset
temperature for showering.
• The lever control is used to divert the water from the bath
to the shower and control the flow rate. When the lever is
in the central position, water will cease to run.
Instructions for use.
Version 8 12/2018
Page 5