Amerisolar Wolfram-BAT-10.24 Installatiehandleiding - Pagina 16
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Amerisolar Wolfram-BAT-10.24. Amerisolar Wolfram-BAT-10.24 20 pagina's.
Worldwide Energy and Manufacturing USA Co., Limited
Figure 10. connect the circuit breaker and the battery box
Step 2: Install the power output wiring harness
The cables from the circuit breaker to the output terminal block have been pre-installed inside
the cabinet. The user only needs to install the output wiring block to the external cables of the
cabinet. Use M6*12 bolts to fix the cables out of the electrical cabinet through the waterproof
connector from the terminal block.
Step 3: Install the communication harness
Connect the "Link Port 0" of the lower battery box and the "Link Port 1" of the upper battery
box with a network cable. The "CAN" of the upper battery box is connected to the inverter
external to the box.
Figure 11. install the power output wiring harness
14
Packing
accessories 6
Packing
accessories7