Acer XR342CK Gebruikershandleiding - Pagina 25
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Acer XR342CK. Acer XR342CK 27 pagina's.
Ook voor Acer XR342CK: Gebruikershandleiding (23 pagina's)
Pagina afdrukken
2.
Toggle the joystick to the up or down to select System from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3.
Toggle to the left or right to adjust the sliding scales.
4.
Input: Select the source from DP In, HDMI 2.0,HDMI(MHL),or miniDP.
5.
Auto Source:The default is "On", can support auto search for signal source in order.
6.
Daisy Chain: Default is extend, can select daisy chain function extend or clone. Clone
Mode is not supported with Adaptive-Sync.
7.
DP Format :Default is DP1.2, can selection DP support DP1.1 or DP1.2 format.
8.
Wide mode: You can select which screen aspect you are using. The options are Full,
Aspect, and 1:1.
9.
PIP/PBP settings
10. Ambient light: Adjust the lighting effects, color, and style. When choosing lighting
effects by MNT Status, following colors will be shown:
White: Normal mode.
Red: Adaptive-Sync mode.
11. Hotkey Assigment: Select the function of shortcut key 1(Modes, Brightness, Input,
Volume, Gamma, Contrast, Blue Light, Over Drive,PIP/PBP) and shortcut keys 2
(Modes, Brightness, Input, Volume, Gamma, Contrast, Blue Light, Over Drive,PIP/PBP)
12. DDC/CI: Allows the monitor settings to be set through the software on the PC.
-----------------------------------------------------------------------------------------------------------
Note: DDC/CI, short for Display Data Channel/Command Interface, which allows
monitor controls to be sent via software.
13. HDMI Black level setting.
14. Quick start mode: Select Off or On. Turn on to speed up boot speed.
15. Power-off USB charge: Turn On or Off.
Save Setting to...(User mode only)
Game Mode - User
Picture
Game Mode Action
Color
Game Mode Racting
Audio
Game Mode Sport
Gaming
OSD
System
Save setting to...
Move
Enter
1.
Press the MENU key to open the OSD.
2.
Toggle the joystick to the up or down to select "Save Setting to..." from the OSD.Then
toggle to the right to navigate to the element you wish to adjust and press the joystick
to enter it.
X