Door-Gard Wiegand 272wp Instructies voor programmering en gebruik - Pagina 3

Blader online of download pdf Instructies voor programmering en gebruik voor {categorie_naam} Door-Gard Wiegand 272wp. Door-Gard Wiegand 272wp 4 pagina's. Wiegand 272 series

Pagina afdrukken

PROGRAMMING OPTIONS CHART

If the pre-programmed default values must be changed

or additional functions are desired, the following options may be programmed.

1. Enter programming mode

2. Auto entry on (no * required)

3. Auto entry off ( * required)

4. Sounder feedback on keypress

5. Sounder feedback on keypress off

6. LED options

Green LED activates when line is pulled low

Green LED activates when line is pulled high

Red LED activates when line is pulled low

Red LED activates when line is pulled high

Green LED enable

Green LED disabled

Red LED enable

Red LED disabled

Yellow LED feedback on keypress enabled

Yellow LED feedback on keypress disabled

7. Erase keypad memory and reset defaults

8. Change master code

9. Select Wiegand Format (from table below)

10.Set Site Number

11.Set Group ID

12.Exit Program Mode

The Wiegand format, group ID, and site number is specified by the host access control system and should be deter-

mined prior to programming your DoorwGard Wiegand keypad.

There are 8 different wiegand formats supported by the DoorwGard Wiegand Series keypads. The wiegand format is

set through command 63 and must be selected prior to programming the Site Number or Group ID. The user can set up

the Site Number through command 64. The exact range for a valid Site Number is determined by the Wiegand format

which is why it must be selected first.

Some of the Wiegand formats have a Group ID embedded in their frames. Command 65 is used to set up the Group

IDs. As with the Site Numbers, the valid ranges for Group ID entries are based on the Wiegand format. If the yellow led

glows steady after entering this command, there are two possible problems. Either the current format does not support

Group IDs or the ID entered is invalid. A table showing the valid ranges for Site Numbers and Group IDs based on the

various formats is presented below.

Format

Press

Format Table

Frame Size

PINs

26 bits

65536

28 bits

32768

29 bits

524288

30 bits

65536

31 bits

65536

32 bits

65536

36 bits

1048576

29 bits

524288

99 # (master code) *

30 # 2 # 1 # * *

30 # 2 # 0 # * *

30 # 0 # 1 # * *

30 # 0 # 0 # * *

31 # 4 # 0 # * *

31 # 4 # 1 # * *

31 # 2 # 0 # * *

31 # 2 # 1 # * *

31 # 3 # 1 # * *

31 # 3 # 0 # * *

31 # 1 # 1 # * *

31 # 1 # 0 # * *

31 # 0 # 1 # * *

31 # 0 # 0 # * *

46 # 00000 # 00000 # * *

1 # code * code *

63 # 0 # format # * *

64 # 0 # (site number) # * *

65 # 0 # (group id number) # * *

Sites

Groups

256

N/A

256

N/A

256

N/A

256

2048

256

N/A

256

N/A

6057130 REV 1.1