Akva HYBRID HIGH Q Handmatig - Pagina 2

Blader online of download pdf Handmatig voor {categorie_naam} Akva HYBRID HIGH Q. Akva HYBRID HIGH Q 3 pagina's.



Fit the legs at the foot end loosely to the upholstered foot end piece. Place the foot end

piece on the base boards and fasten these with upper corner fittings. Pull back the

frame approx. 20 cm and screw on the lower corner fittings. Tighten the screws of the

foot end legs.



Push the frame back towards the headboard and fit the corner fittings to the headboard.



Fit the stabilisation angels to the side pieces and the base board by means of 6 screws.

Finally, also the stabilisation angels at the head end.



Place the lower part of the cover in a way that the AKVA Logo is located at the foot end,

right side. Remove the top, place the fixing paddles in the holes made in the bottom of

the cover and secure them by positioning them in the small base board holes.



Place the side foam rails in the bottom of the cover. Then the foot end foam rail and the

foam layer at the head board end. The side foam rails and foot end rail are screwed into

the frame.