DoorHan Swing-2500 Installatie- en bedieningshandleiding - Pagina 3

Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} DoorHan Swing-2500. DoorHan Swing-2500 12 pagina's.

Pagina afdrukken
1. general information
The electromechanical linear operator Swing-2500 is intended for automation of a street double-leaf swinging gate with a load-
bearing structure.
The body of the operator, which consists of two silumin parts, houses a motor, a reducer and a lead screw.
A self-blocking system, consisting of a worm gear and a planetary gearbox blocks the gate leaves, if the motor is off. The easy-
to-use and safe release system allows the gate leaves to be opened/closed manually, in case of a power cut or control unit failure.
Operation of the automatic system is controlled from a remote control unit in a shockproof hermetic case.
1.1. teChniCal speCifiCations
consumption current
Maximal wing length
Maximal wing weight
Thermal protection
Operating temperature range
1.2. operator paCkage
upon receiving the operator, unpack it and inspect carefully. If any signs of damage are observed, please contact your supplier.
The operator components included in the standard package are listed in the following table.
#
1
* При ширине створки 2 м.
2
3
4
5
6
7
2. safety instrUCtions
Warning! important safety instrUCtions! It is important for the safety of persons to follow safety instructions.
Save these instructions.
F ollow all instructions since incorrect installation can lead to severe injury.
S wing-2500 was designed for automation of a street double l eaf swinging gate with a load b earing structure. Do not use
the operator for other than intended purposes.
D oorHan shall not be held responsible in case of injury caused by misuse of the product.
p rior to installation make sure that the gate moves smoothly.
I nstallation must be performed in accordance with the standards EN12453 and EN 12445. For countries, which are not
Ec members, these requirements are to be met.
specifications
Supply voltage
Rated power
Rod speed
protection rating
use intensity
name
Operator
control block unit
Release
Rear fastening bracket
Front fastening bracket
Set of fasteners
user manual

General InfOrMatIOn

Units
220–240 V/50 Hz
150 W
1,8 A
1,8 cm/s
2,5 m
350 kg
150°
Ip 44
50 %
–20...+55 °c
Quantity
2
1
2
2
2
1
1
3