DoorHan SHAFT-30 Installatie- en bedieningshandleiding - Pagina 9

Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} DoorHan SHAFT-30. DoorHan SHAFT-30 12 pagina's. Ip65/60 ip65
Ook voor DoorHan SHAFT-30: Installatiehandleiding (8 pagina's), Handmatig (12 pagina's)

DoorHan SHAFT-30 Installatie- en bedieningshandleiding

8. TROUBLESHOOTING

Problem
Operator does not run
After the manual chain has been used the operator
does not work after pushing the buttons of control
station or remote control
Operator stops suddenly
Door does not open/close fully
Possible reason
Power is off
Obstruction to the door movement
Poor connection of electric wires
The operator is released
Return in the original position was not executed
The door is not balanced
The operator's thermal protection is active
Incorrect adjustment of limit switches
TROUBLESHOOTING
Remedy
Make sure, that the power is on
Remove the obstruction
Check reliability of electric wiring connection
Engage the operator
Pull the reducer chain to resume operation
Balance the door
Let the operator cool
Adjust limit switches
9