Canon PIXMA MP500 Installatie-instructie - Pagina 9

Blader online of download pdf Installatie-instructie voor {categorie_naam} Canon PIXMA MP500. Canon PIXMA MP500 9 pagina's. Continuous ink supply system
Ook voor Canon PIXMA MP500: Specificatieblad (2 pagina's), Start Here (2 pagina's), Aanvullende handleiding (6 pagina's), Snelstarthandleiding (39 pagina's), Snelstarthandleiding (2 pagina's)

button.

Service error 6502 generally means that your cartridge chips cannot be recognized. The primary causes of this error

message are:

1- Covering of the LED light at the back of the chip

2- Incorrect chip positioning on the cartridge. Again ensure that no tape, glue etc is covering of impeding LED on

the rear of the chips.

3- The lid of the printer is open whilst testing-This will cause the ambient light to interfere with the LED lights which

are checked as the print head moves from left to right.

4- The LED on one or more of the cartridges has been damaged when removing it from the original cartridge

5- The chips have been mixed up and fitted to the incorrect CISS cartridge.(i.e. Yellow OEM cartridge chip on a

Blue CISS cartridge).These chips are color specific and need to be fitted to the corresponding colored CISS

cartridge

6- Ink is covering the cartridge chip of a sensitive area of the cartridge and preventing the LED light sensor from

functioning

9. Notice:

1. Please don't take out cartridge at random after installing the CIS system. Keep the reservoir

bottles on the same level with the printer.

2 Try to keep at least 1/2 inch of ink in the bottles.

3 Don't place the Reservoir Bottles too much higher or lower than the printer.

4 Suggested using in a dry place between 15 and 35 degree. Avoid exposure to direct sunlight.

5 Don't reverse or lean the continuous ink supply systems during shipping. Please make sure all the ink filling holes and

ventilation holes are closed tightly during transportation. Otherwise, the ink may leak.

6 Don't sway the cartridge frequently. It may cause ink leakage.

7 Don't pull out the connector of cartridge and don't tear off adhesive tape at the bottom of cartridge.

10. WARNING: