Astralpool SLX Gedetailleerde instructies - Pagina 5

Blader online of download pdf Gedetailleerde instructies voor {categorie_naam} Astralpool SLX. Astralpool SLX 6 pagina's. Underwater niche lights for fibreglass pools
Ook voor Astralpool SLX: Handleiding voor installatie en gebruik (6 pagina's), Snelstarthandleiding (4 pagina's), Handleiding voor installatie-instructies (7 pagina's), Installatie-instructies (4 pagina's)

To create a custom pattern

In addition to the in-built colour patterns, you are able to create a Customised Pattern of your own. You

can control:

 The number of segments in the pattern;

 The colour used in each segment;

 The duration of the segments;

 The effect to be used when transitioning between segments; and,

 The transition time from one segment to the next.

To configure your customised pattern, follow these steps:

1. Using the steps outlines above, change the light's colour selection to "Customised Pattern" (i.e.

two selections after White).

2. Turn off the light and wait for at least three seconds.

3. Turn on the light and within two seconds perform a single switch sequence.

4. Firstly, configure the number of segments to be used in the pattern. The lights will flash Green the

same number of times as segments to use, with a Red flash to break up the pattern. For example,

three Green flashes indicate that three segments will be used in the pattern. You may choose from

1 to 16 segments. To change the number of segments in use, perform a single switch sequence

and wait at least three seconds. To confirm the number of segments, perform a double switch

sequence.

5. Next, configure the colour to use in each segment. The light will firstly flash once per second in

the Blue colour. This will be the colour used in the first segment. To change the colour for the

segment, perform a single switch sequence and wait at least three seconds. The colours you may

choose are: Blue, Magenta, Red, Orange, Yellow, Green, Aqua, Pink, Light Yellow, Pastel Green,

Baby Blue, Pastel Blue, Mauve, Cool White and Warm White. To confirm your colour selection

for this segment, perform a double switch sequence. The light will then flash Blue again, as you

are now configuring the next segment. Repeat this step until you have chosen a colour for all

segments.

6. Next, choose the duration of each segment. Similarly to configuring the number of segments, the

light will flash Green a certain number of times with a Red flash in between. Initially the number

of Green flashes is 0, so you will see a Red flash only. The number of Green flashes indicates the

duration of the segment.

To change the duration of the segments, perform a single switch sequence and wait at least three

seconds. To confirm your selection, perform a double switch sequence.

Inst.374 Astral Pool SLX Light Detailed Instructions V10.15

No. Green Flashes

Segment Duration

0.2 seconds

1 second

2 seconds

3 seconds

4 seconds

5 seconds

6 seconds

7 seconds

8 seconds