Canon PIXMA MP610 Series Servicehandleiding - Pagina 29
Blader online of download pdf Servicehandleiding voor {categorie_naam} Canon PIXMA MP610 Series. Canon PIXMA MP610 Series 45 pagina's. All-in-one photo inkjet printer
Ook voor Canon PIXMA MP610 Series: Start Here (2 pagina's), Aanvullende handleiding (6 pagina's), Brochure & specificaties (2 pagina's), Snelstarthandleiding (40 pagina's), Snelstarthandleiding (2 pagina's)
Pagina afdrukken
- 1. Table of Contents
- 1. 1 Maintenance
- 1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by Service Engineer
- 1. Customer Maintenance
- 1. Special Tools
- 1. Serial Number Location
- 2. 2 List of Error Display / Indication
- 2. Operator Call Errors
- 2. Service Call Errors
- 2. Other Error Messages
- 2. Warnings
- 2. Troubleshooting by Symptom
- 3. 3 Repair
- 3. Notes on Service Part Replacement
- 3. Adjustment / Settings
- 3. Verification Items
(6) Service mode
<Service mode operation procedures>
1) With the machine power turned off, while pressing the Stop/Reset button, press and hold the ON/OFF button. (DO NOT release the
buttons). The Power LED lights in green to indicate that a function is selectable.
2) While holding the ON/OFF button, release the Stop/Reset button. (DO NOT release the ON/OFF button.)
3) While holding the ON/OFF button, press the Stop/Reset button 2 times, and then release both the ON/OFF and Stop/Reset buttons.
(Each time the Stop/Reset button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green,
starting with Alarm LED.)
4) When the Power LED lights in green (and "Service Mode CANON Idle" is displayed on the LCD), press the Stop/Reset button the
specified number of time(s) according to the function listed in the table below, then press the ON/OFF button. (Each time the
Stop/Reset button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm
LED.)
Time(s)
LED indication
0 times
Green (Power)
1 time
Orange (Alarm)
2 times
Green (Power)
3 times
Orange (Alarm)
4 times
Green (Power)
Function
Power off
Service test print
EEPROM information print
EEPROM initialization
Ink absorber counter resetting Set a sheet of A4 or Letter sized plain paper in the rear
27 / 43
Remarks
When the print head is not installed, the carriage returns
and locks in the home position capped.
Service test print
- Model name
- ROM version
- Ink absorber counter value (ink amount in the ink
absorber)
- USB serial number
- Destination
- EEPROM information
- Ink system function check result
- Barcode (model name + destination)
See 3-4. Verification Items, (1) Service test print,
"Service test print sample."
EEPROM information print
- Model name
- Destination
- ROM version
- Ink absorber counter value (ink amount in the ink
absorber)
- Print information
- Error information, etc.
The following items are NOT initialized, and the
shipment arrival flag is not on:
- USB serial number
- Destination settings
- Record of ink absorber counter resetting and setting
- Record of repair at the production site
- CD / DVD print position correction value
- LF / Eject correction values
- Left margin correction value
- Production site E-MIP correction value and enabling of
it
- Endurance correction value and enabling of it
- Record of disabling the function to detect the remaining
ink amount
- Ink absorber counter value (ink amount in the ink
absorber)
tray or cassette, and reset the ink absorber counter. After
the ink absorber counter is reset, the counter value is
printed automatically.