Canon PIXMA MX330 Aan de slag handleiding - Pagina 7
Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Canon PIXMA MX330. Canon PIXMA MX330 37 pagina's. Cartridge reset
Ook voor Canon PIXMA MX330: Handmatig (4 pagina's)
Pagina afdrukken
- 1. Getting Started
- 2. Remove the Protective Material
- 3. Connect the Telephone Line
- 4. Turn the Power on
- 5. Install the FINE Cartridges
- 6. Set up for Fax Reception
- 7. Install the Software
- 8. Loading Paper
- 9. After Installing the Machine
- 10. Try Using the Machine
- 11. Try Copying
- 12. Print Photos from a Computer
- 13. Send Faxes
- 14. Maintenance
- 15. Specifications
5
Install the FINE Cartridges
•
Handle the FINE Cartridges carefully. Do not
drop or apply excessive pressure to them.
•
Be sure to use the supplied FINE Cartridges.
1
A
Lift the Scanning Unit (Cover) (A) until it locks into place.
Close the Document Cover (D) and lift it with the Scanning Unit (Cover).
The Scanning Unit Support (E) is fixed automatically.
The FINE Cartridge Holder (F) comes out. (This is where you install the cartridges.)
•
If the FINE Cartridge Holder returns to the right, close the Scanning Unit (Cover) and reopen it.
•
If the FINE Cartridge Holder does not come out, make sure that the machine is turned on.
1
2
3
D
F
5
4
6
7
8
E