Canon PIXMA MX512 Handmatig - Pagina 3

Blader online of download pdf Handmatig voor {categorie_naam} Canon PIXMA MX512. Canon PIXMA MX512 4 pagina's. Guide for printer setup for network [spanish version]
Ook voor Canon PIXMA MX512: Aan de slag handleiding (4 pagina's), Installatiehandleiding (22 pagina's), Installatiehandleiding (7 pagina's), Installatiehandleiding (3 pagina's), Fax Setup (2 pagina's), Specificatie (2 pagina's), Instellen (29 pagina's), Installatiehandleiding (17 pagina's), (Engels) Configuratiegids (22 pagina's)

c. While pressing the "Reset button", press and hold the "Color Start" button.

d. Wait for 5 seconds.

e. Release the "Color Start" button, and then release the "Reset Button".

Wait until the printer starts to configure itself. This should take approximately around 20

seconds.

g. The no. "1" should be on the display, press and hold the "Tool" button and the letter "A"

should now be on the display.

h. While pressing on the "Tool" button, press and hold the "Reset button".

Wait until there are no more blinking lights on the printer.

Release the "Tool" button, and then release the "Reset Button".

Printing may continue under the 'ink out' condition.

F. Pixma iP/MP/MX/MG Series: "Ink Waste" Counter Reset****

a. With the printer powered off but still connected to a power source, press the Power button

while pressing and holding the Stop/ Reset button.

b. When the Power LED is lit, press the Stop/Reset button two (2) times while pressing and

holding the Power button.

c. When releasing the Power button and the Stop / Reset button (regardless of order), the

printer will move into a service mode (...waits for a menu selection)

d. When the LED lights green, press the Stop/Reset button the specified number of time(s)

according to the function listed in the table below (each time the Stop/Reset button is

pressed, the LED alternatively lights in orange and green, starting with orange)

LED Function:

0 time Green - Power off

1 time Orange - Service pattern print

2 times Green - EEPROM print

3 times Orange - EEPROM reset

4 times Green - Waste ink counter reset

5 times Orange - Destination setting

6 times Green - Print head deep cleaning

11 times Orange - Button / LCD checking

12 or more times - Returns to a menu selection

* [30 – 211 Inks] CANON

MP170, MP180, MP190, MP210, MP450, MP460, MP470, MX300, MX310, MP240, MP250, MP260,

MP270, MP280, MP480, MP490, MP495, MX320, MX330, MX340, MX350, MX360, MX410, MX420,

ip2700, iP2702

PIXMA MP190, MP470, MX300, MX310, iP1600, iP1800, iP2600, MP150, MP160,

(Procedure #4)