Canon PIXMA MX700 Series Handleiding voor netwerkinstellingen - Pagina 21

Blader online of download pdf Handleiding voor netwerkinstellingen voor {categorie_naam} Canon PIXMA MX700 Series. Canon PIXMA MX700 Series 32 pagina's. Office all-in-one printer
Ook voor Canon PIXMA MX700 Series: Schoonmaakhandleiding (7 pagina's), Aanvullende handleiding (6 pagina's), Installatie-instructies (2 pagina's), Brochure & specificaties (2 pagina's), Technische informatie (2 pagina's), Servicehandleiding (44 pagina's)

2-A Setting up for use over LAN

This section describes how to set up the machine to be used over wired LAN, when the machine has

not been connected to the network. This setup procedure requires settings to be performed on the

machine and the computer.

On the Canon IJ Network Tool screen,

select LAN connection, then click OK.

If the Canon IJ Network Tool does not start up

automatically, select Library > Printers > Canon >

BJPrinter > Utilities > Canon IJ Network Tool.

Note

If you select USB connection, the Canon IJ Network

Tool will exit without setting up the machine to be used

over LAN.

If the screen shown on the right appears, make

sure of the following and click OK.

– The machine is turned on.

– The machine is connected to the computer with a

USB cable.

– The MP Drivers have been installed.

Select Setup in the pop-up menu, select your

machine's name in Printers, then click OK.

Note

If no printer is detected, click OK. Make sure that

the machine is connected to the computer with a

USB cable and turned on, then click Update.

If the machine's network settings are already

configured, the Setup Environment Confirmation

dialog box appears asking for your confirmation to

use the machine with the current settings. You can

proceed with the setup using the current network

settings. To do so, click Use as is. To reconfigure

the network settings, click Reconfigure.