dacell DN-15W Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} dacell DN-15W. dacell DN-15W 16 pagina's. Digital indicator

1. Features

We are grateful to you for picking up our product. If you experience problems while

using it, you may refer to the user manual or contact the Technical Support Department

of the company.

This product is an indicator which amplifies the minute voltage signals of each sensor

and converts themit into digital. It is mainly used in Physics quantity measurement for

strain gauge, pressure sensor, LVDT, and acceleration sensor, etc. It has the following

features.

A medium and high speed A/D conversion device is adopted to detect input signals

from the sensor. A D/A device at the same speed is adopted to detect analogue output

signals, which makes high-speed analog-digital converter, digital peak hold, sample

hold and section peak hold.

Two systems are adopted: calibration system based on real weight(standard weight);

calibration system based on the rated output of the sensor.

As set value such as zero, span, upper limit and low limit, etc. is stored in FALSH

MEMORY, it is not necessary to reset the input data for they are stored in the memory

even when the electricity or power is cut off.

Power of this product did 220V(50~60Hz) with standard, 110V speaks when ordering,

1. Body

2. Operating instructions

3. I Terminal and Power Cable

4. The panel the parts for a fixation