Canon PIXMA MX870 Series Handleiding voor netwerkinstellingen - Pagina 8

Blader online of download pdf Handleiding voor netwerkinstellingen voor {categorie_naam} Canon PIXMA MX870 Series. Canon PIXMA MX870 Series 34 pagina's. Setting up in default mode (tel priority mode) without an answering machine
Ook voor Canon PIXMA MX870 Series: Installatiehandleiding (17 pagina's), Installatiehandleiding (11 pagina's), Handleiding voor netwerkinstellingen (16 pagina's), Brochure (2 pagina's), Handleiding voor netwerkinstallatie (24 pagina's), Handleiding voor netwerkinstallatie (17 pagina's), Installatiehandleiding (15 pagina's), Instellen (15 pagina's)

WPS

Action

The message appears when multiple access points are

detected.

Wait for a while, then configure the settings again.

Check

The message appears when an error occurs.

Check the access point settings, then configure WPS

settings again.

•

For details on how to check the settings of the access point,

refer to the manual supplied with the access point or contact its

manufacturer.

•

For the procedure to configure WPS settings of the machine,

refer to "Wireless Setup Using WPS (Wi-Fi Protected Setup)" in

the printed manual: Getting Started.

•

When using an access point that does not support WPS, configure settings manually. For the

procedure to configure settings of the machine manually, refer to "Wireless Setup" in the printed

manual: Getting Started.

Check

Check 1

For a wireless connection, make sure that you follow Check 1, 2, 3, 4, 5 and 6 of

"Connection Checklist" on page 15, then click Update (A).

For a wired connection, make sure that you follow Check 1, 2, 3, 7 and 8 of

"Connection Checklist" on page 15, then click Update (A).

Check 2

Is the machine connected to a network?

•

To confirm the connection status, press the Setup button, then using the { } [ ] and OK

buttons, select Device settings > LAN settings > Confirm LAN settings > WLAN setting list

or LAN setting list. Make sure that Connection is set to Active.

If the machine is not connected to a network, perform setup again by following the

procedures in "Wireless Setup" and onward or "Wired Setup" and onward in the printed

manual: Getting Started.