Astralpool DMX Installatie-, Bedienings- en Onderhoudshandleiding - Pagina 12

Blader online of download pdf Installatie-, Bedienings- en Onderhoudshandleiding voor {categorie_naam} Astralpool DMX. Astralpool DMX 18 pagina's. Variable pump

Astralpool DMX Installatie-, Bedienings- en Onderhoudshandleiding
[en]
Fountain Units
1

GENERAL SAFETY

1.1

ELECTRICAL SAFETY

-
Disconnect the unit from the power supply before doing any assembly or
maintenance jobs.
-
Do not touch the water or get into the water while the unit is connected to the
power supply.
Connect the unit to an equipotential connection. Use one of the fastening unit's
-
points (①).
-
Connect the unit to a power supply with an earth connection, protected by the
following components:
An RCD safety switch with a maximum residual current of 30 mA.
A circuit breaker fuse properly sized according to the power consumption
of the unit.
-
Use an H07RN-F type waterproof cable.
1.2

SAFETY IN USE AND CONTACT WITH WATER

-
The fountain water must be under the following conditions:
-
Water
characteristics
Temperature
pH
Free residual
chlorine
Total alkalinity
(TAC)
Calcium hardness
(CH)
Salt level
Total dissolved
solids (TDS)
-
If the temperature is below 4 °C, empty the unit to prevent it from breaking due
to the formation of ice inside it.
-
Do not tamper with the factory-fitted waterproof seals. Otherwise, the unit
could lose its warranty.
12
INSTALLATION, OPERATION AND MAINTENANCE MANUAL; DMX VARIABLE PUMP
Minimum
Maximum value
value
4 °C
6.9
0.5 ppm
80 ppm
200 ppm
-
-
35 °C
7.8
2.0 ppm
120 ppm
1,000 ppm
2 g/l
2,000 ppm