Acer AcerPower 4100 Aan de slag handleiding - Pagina 17
Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Acer AcerPower 4100. Acer AcerPower 4100 20 pagina's. Acer acerpower 4100: user guide
Ook voor Acer AcerPower 4100: Aanvullende handleiding (5 pagina's), Aan de slag (20 pagina's)
Pagina afdrukken
Table 1-1
System Error Messages
Error Message
Bad CMOS Battery
CMOS Checksum
Error
Floppy Drive
Controller Error
Floppy Drive Error
DRAM Configuration
Error
Equipment
Configuration Error
Hard Disk Controller
Error
Hard Disk 0 (1, 2, 3)
Auto Detection
Failed
I/O Parity Error
PS/2 Keyboard
Error or No
Keyboard
Connected
PS/2 Keyboard
Interface Error
Memory Error
Memory Size
Mismatch
Corrective Action
Replace battery. Contact your dealer.
Run Setup. See Chapter 3.
Check and connect the cable to the floppy
drive or controller.
Floppy may be bad. If not, check the
floppy drive and replace if necessary.
Check and modify DRAM configuration to
agree with Table 4-1.
Run Setup. See Chapter 3.
Check and connect the cable to the hard
disk drive or controller.
Replace the hard disk drive controller.
Check the HDD cable connections and
CMOS setup configuration.
Contact your dealer.
Check and connect the keyboard to the
system unit.
Contact your dealer.
Check DIMMs on the system board.
Contact your dealer.
Run Setup. See Chapter 3.
Chapter 1 - Getting Started 1-17