Cognex DataMan 60 Snelle referentiehandleiding - Pagina 9
Blader online of download pdf Snelle referentiehandleiding voor {categorie_naam} Cognex DataMan 60. Cognex DataMan 60 18 pagina's. Control box
Ook voor Cognex DataMan 60: Referentiehandleiding (5 pagina's)
Pagina afdrukken
Connect the Ethernet Cable
1. Connect the Ethernet cable's RJ-45 connector to a switch/router or PC, as
applicable.
Connect the Breakout Cable
Note: You can clip unused wires short or use a tie made of non-conductive
material to tie them back. For RS-232, use the Power Supply return path for
ground.
1. Verify that the power supply being used is unplugged and not receiving
power.
2. Connect the cable on the back of the device to an RS-232 adapter cable
with power tab.
3. Connect a 6 V power supply.
4. Restore power to the power supply and turn it on if necessary.
9