Cognex DataMan 8000 Series Snelle referentiehandleiding - Pagina 14
Blader online of download pdf Snelle referentiehandleiding voor {categorie_naam} Cognex DataMan 8000 Series. Cognex DataMan 8000 Series 17 pagina's. Cognex dataman 8000 series barcode reader

Laser Information
LASER LIGHT, DO NOT STARE INTO BEAM: CLASS 2 LASER PRODUCT
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE SERIOUS INJURY
• CAUTION: Use of controls or adjustments or performance of procedures
other than those speciied herein may result in hazardous radiation
exposure.
• Do not attempt to service or repair this product -- return it to Cognex for
service.
• Do not permit anyone other than Cognex Corporation to service, repair, or
adjust this product.
• Do not attempt to open or modify this device except as described in this
document.
• Do not direct or relect laser light toward people or relective objects.
• Do not operate this device if it is damaged or if the covers or seals are
missing or damaged.
This Laser Product is designated as Class 2 during all procedures of operation.
Wavelength
Laser Power for classiication
Beam Diameter
Divergence
For assistance contact Cognex Corporation at http://support.cognex.com
26 DataMan 8000 Quick Reference Guide
650 nm
< 1 mW
< 3mm at aperture
< 5 mrad
Agency Compliance Statements
The DataMan 8000 series meets or exceeds the requirements of all applicable standards organiza-
tions for safe operation. However, as with any electrical equipment, the best way to ensure safe
operation is to operate them according to the agency guidelines that follow. Please read these
guidelines carefully before using your device.
Regulator
Speciication
USA
FCC Part 15, Class A
FDA/CDRH Laser Notice No 50
Canada
ICES-003
European Community
EN55022 (CISPR 22) Class A
EN55024:1998 +A1:2001 +A2: 2003
EN60950
EN60825-1
Australia
C-TICK, AS/NZS CISPR 22 / EN 55022 for Class A Equipment
Japan
J55022, Class A
FCC Class A Compliance Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pur-
suant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case the user will be
required to correct the interference at personal expense.
Canadian Compliance
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
DataMan 8000 Quick Reference Guide 27