Canon EOS C200B Procedure voor bijwerken firmware - Pagina 3
Blader online of download pdf Procedure voor bijwerken firmware voor {categorie_naam} Canon EOS C200B. Canon EOS C200B 5 pagina's. Digital cinema camera
Ook voor Canon EOS C200B: Handmatig (3 pagina's)
Pagina afdrukken
Step 3: Prepare an SD card to use for the firmware update
As preparation before the update, first initialize an SD card, and then use a computer to copy the downloaded
update data to the SD card.
Caution
When you initialize the SD card, all of the data saved on it will be erased. Please save any important data on the SD card to
your computer or somewhere else before initializing the SD card. In addition, if you perform the firmware update with data
remaining on the SD card, it could cause the camera to malfunction. Make sure you initialize the SD card before performing
the update.
Initialize the SD card with the camera
1.
Insert the SD card into the camera's SD card slot A, and close the SD card compartment cover.
2.
Set the
3.
Press the MENU, and open the [Initialize Media] submenu.
4.
Select [SD Card A] and then press the joystick.
[
Recording/Media Setup] ➤ [Initialize Media] ➤ [SD Card A]
5.
Select [OK] and then press the joystick.
6.
When the confirmation message appears, press the joystick.
The SD card is initialized and all the data it contains is erased.
7.
Press the MENU, set the
Copy the firmware update data to the SD card
Use a computer to copy the firmware update data to the SD card initialized on the camera. For computer
operations, please refer to the procedure below corresponding to your computer's OS (Windows or Mac OS).
For Windows:
1.
Insert the initialized SD card into a card reader or the computer's SD card slot.
A [CANON] icon will be displayed in [Devices with Removable Storage] under [Computer].
2.
To copy the data, drag & drop the [VNC4.FIM] update data in the downloaded [c200-v1041-win] folder to
the [CANON] icon.
Caution
Please be sure to copy the update data to the root directory of the [CANON] SD card.
3.
After copying the data, open the folder by double-clicking the [CANON] icon.
If the [VNC4.FIM] file (the firmware update data) is there, the copying process is complete.
switch to CAMERA.
switch to OFF, and then remove the SD card.
3