Astrel Instruments AST-8300-A Aan de slag - Pagina 18

Blader online of download pdf Aan de slag voor {categorie_naam} Astrel Instruments AST-8300-A. Astrel Instruments AST-8300-A 20 pagina's.
Ook voor Astrel Instruments AST-8300-A: Automanualr Handboek (14 pagina's), Gebruikershandleiding (6 pagina's)

Pagina afdrukken

Astrel Instruments

liveview taking images in 9x10 binning mode, even an exposure of a few seconds easily

reveals most deepsky objects, making the framing process as easy as doing a portrait

with a conventional camera.

STEP 7: check temperature stability

• The cooling process should reach a stable set point temperature after 10-15 minutes

depending on the environment. The time needed to reach the selected temperature set

point may be shorter, but the algorithm needs some more time to calibrate in order to

maintain a temperature stable to less then 0.1°C. To check that the temperature is stable,

start the Temperature Monitor application again and monitor the temperature variations

for a while

• Push

Done

to leave the application and come back to the Desktop

STEP 8: set the exposure parameters and start photographing

• Stat the Take Photos application.

• Using the tabs named as the filters you set in the Setup application, you can define for

each filter the exposure time, the number of exposures and the binning level. Remember

to check the enabled box in order to use the selected filter.

• Select the readout mode between 2 and 16 samples: the 2 samples readout has about

7.5e- readout noise and about 10 seconds download time, while the 16 samples readout

Getting Started

18/20

AST-8300-A

rev D