Ames Instruments 58111 Gebruiksaanwijzing & veiligheidsinstructies - Pagina 7
Blader online of download pdf Gebruiksaanwijzing & veiligheidsinstructies voor {categorie_naam} Ames Instruments 58111. Ames Instruments 58111 8 pagina's.
Pagina afdrukken
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Release the Trigger and remove the batteries from the Laser Thermometer
before performing any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If damage is noted, have
the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
1. BEFORE EACH USE, inspect the general
condition of the tool. Check for:
• loose hardware,
• misalignment or binding of parts,
• cracked or broken parts,
• damaged electrical wiring, and
• any other condition that may
affect its safe operation.
Battery Replacement
To avoid incorrect measurements, replace
the batteries when the status is low.
1. Turn camera off.
1. Loosen screw on Battery Cover.
Calibration
Have tool calibrated by a qualified technician every year.
Record Product's Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Item 58111
For technical questions, please call 1-888-866-5797.
2. AFTER USE, wipe lens first, then external
surfaces of the tool with clean,damp
cloth. Only use water, do not use soap
or chemicals. DO NOT submerge tool
in water or splash water on lens.
3. Remove batteries if not in
use for long periods.
4. Store tool in its case in a dry location
out of reach of children.
5. Other than batteries, there are no
replaceable parts. Repairs should be
done by a qualified technician.
2. Remove Battery Cover.
3. Remove batteries and replace with same.
4. Replace Battery Cover, secure with screw.
Page 7