Cogvis cogvisAI Installatiehandleiding - Pagina 4
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cogvis cogvisAI. Cogvis cogvisAI 16 pagina's.
Pagina afdrukken2. Package content and preparation
Package contents for the cogvisAI system for on-site installation:
•
USB power supply and 5m connection cable
•
cogvisAI sensor
•
4 dowels and 4 screws
The cogvisAI sensor consists of 2 parts: the metal base part with the already mounted
board (evaluation unit) and the white plastic sensor housing:
metal base part
The sensor housing is connected to the base unit through 4 clamps. Both parts can be
released from each other by slight pressure from the outside (along the lower edge of
the sensor unit in the area of the clamps). Please note the following illustrations:
Step 1:
Press on both sides of the outer edge of the unit in
the area of the clamps. Gently push the base out
on one side.
plastic sensor housing
Step 2:
As soon as the first side is released, apply the same
principle to the second side and remove the base
completely from the housing.
Installation Guide 2020
page 4 / 16