FLYFANS K-8 64MM EDF JET 4S Handmatig - Pagina 3
Blader online of download pdf Handmatig voor {categorie_naam} FLYFANS K-8 64MM EDF JET 4S. FLYFANS K-8 64MM EDF JET 4S 8 pagina's. Karakorum jet trainer
Pagina afdrukken
Tailplane Servo
1.
Set 9g servo to neutral point and screw on Servo arm. Glue the servo into the slot on the Hori-
zontal Stabilizer. Suggested cable length is 15cm.
Caution:
Require 1 normal and 1 reverse 9g Servo.
2. Ajust pushrods length then link the Servo arm and Control horn.
Caution:
We suggest use the 3rd holes on Servo arm.
Flap and Aileron Servo
3. Set 9g servos to neutral point and screw on Servo arm.
Glue servos into the slot.
Make sure the Flap servo set to correct start point and
correct flap moving direction.
Caution:
We suggest use the 3rd holes on Servo arm.
4. Align all cables along the cable slot. Glue Drop Tank pylon slot into the wing.
Model Assembly
Servo
Horns
Arms
Horns