Ametek Solartron Metrology Wigauge WHT Gebruikers- en installatiehandleiding - Pagina 5

Blader online of download pdf Gebruikers- en installatiehandleiding voor {categorie_naam} Ametek Solartron Metrology Wigauge WHT. Ametek Solartron Metrology Wigauge WHT 17 pagina's. Wireless handtool

Pagina afdrukken

3.0 Mechanical Adjustments

Once the gauge head has been installed its rotational position can be adjusted by approximately 180º about the mounting axis.

1. Using a 3 mm A/F Hex key, undo the M6 grub screw pictured above.

2. Rotate the gauge head to the desired position.

3. Tighten the M6 grub screw to a recommended 1.3-1.5 Nm torque.

Note

Large gauge heads may require a higher torque setting on the grub screw to prevent rotation through use.

Caution

Care must be exercised when using a large gauge head to avoid damaging the grub screw or WHT.

3.0 Mechanical Adjustments

USE 3 mm A/F ALLEN KEY

FOR M6 GRUB SCREW

TORQUE SETTING 1.3-1.5 Nm

502848 Issue 5