Doran DS8150 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Doran DS8150. Doran DS8150 11 pagina's. Chair scale

Weighing a Patient

1. Lock all four wheels on chair scale.

2. Turn on the indicator by pressing the Zero button.

3. The indicator will perform a startup zero.

4. The indicator will momentarily display dashes, "-----", followed by 0.0.

5. Place the patient on the scale chair.

6. The display will scroll dashes for 3-5 seconds and then show the active

weight until the patient's weight is captured.

7. The indicator will beep (when enabled) and then hold the weight on the

display until the scale shuts off.

1. Place item to be zeroed on the chair seat.

2. Press Zero. The scale will display a zero weight. If the item is removed, the

stable negative weight will be automatically zeroed out after 3 seconds.

3. Place Patient onto the chair and the patient's weight, less the item's weight,

will be displayed.

4. To reset the scale weight to zero, Press Zero again with the scale chair empty.

1. With Hold weight displayed, press BMI button to enter the height value. Height

entry starts at 5: 6.0 or 168.0 in representing 5 foot 6 inches or 168 centimeters.

NOTE: Height units can be changed by pressing the Units button.

2. Press the ▲ button to increase or the ▼ button to decrease the value. When

the correct value is displayed, press the BMI button to enter value and exit.

NOTE: A menu timer will exit out of this entry mode if no buttons are pressed

within a 30 second time period.

1. With the patient on the chair, press Reweigh to reinitiate the weighing process.

2. The display will scroll dashes for about 3-5 seconds. Then active weight is

shown until the patient's weight is captured.

3. The indicator will beep (when enabled) and hold the weight on the display until

the scale shuts off automatically.