Doran SCC-AM-00 Installatie- en bedieningshandleiding - Pagina 14

Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} Doran SCC-AM-00. Doran SCC-AM-00 15 pagina's. Sleeping child check

Pagina afdrukken

1. Basic Operation

These two (2) timer modes are independently enabled. The Doran

Sleeping Child Check (SCC-AM) may be ordered with options already

enabled. Or users may enable timers themselves; however some

disassembly may be required to properly access the programming

jumpers. If damage occurs from this procedure, Doran will not

warrant the product.

Selecting Timer Options

Jumper

JP1* Open/cut JP1 for Horn ALARM to be triggered 1 Minute after Ignition Off

JP2* Open/cut JP2 will ARM module after 10 continuous minutes with Ignition Input On.

The module may be ARMED either way when P6 is used in this mode.

*Note: For the 24 volt model, pcb versions before 1.11, the instructions for JP1 and JP2 are

reversed due to mislabeling. Pictured is the 12 volt model.

Open JP1 for 1 Min. after stop

ALARM timer.

Open JP2 for 10 Min. ARM

timer.