ASTRO DEVICES Nexus DSC Handleiding voor snelle installatie - Pagina 6

Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} ASTRO DEVICES Nexus DSC. ASTRO DEVICES Nexus DSC 13 pagina's.

Pagina afdrukken

Then you need to select the telescope:

Nexus DSC allows to have up to five different

telescope

configurations.

rename TELESCOPE 1 to your telescope

name. You just need to activate the Rename

button by using

key. A text cursor now appears under the

name:

You will now be able to edit the name and

change it to your telescope name:

Now you need to set other parameters for

your telescope:

where the mount type can be selected by

using

and

are set to 10000 steps by default and should

be set to the number of steps corresponding

to the number of steps installed on your

telescope. Encoder steps can be set by using

the numeric keys on the keypad. Please

You

can

and then press the

keys. The encoder steps

enable 'Reverse' if required as described

previously:

Two star alignment

Nexus DSC needs to be aligned on two stars

before it can locate celestial objects.

Your telescope does not need to be

also

levelled for Nexus DSC to locate celestial

objects accurately.

The two star alignment is performed in three

steps.

Please go to the Align menu:

Then select Altitude Reference:

Adjust the altitude reference angle if required:

Now

move

depending on the mount type (for 90 degrees

reference):

Telescopes on Alt-Azimuth mount should be

positioned vertically:

Nexus DSC Quick Setup Guide

the

telescope

into

position