Flying Eye DJI MATRICE 300 RTK Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Flying Eye DJI MATRICE 300 RTK. Flying Eye DJI MATRICE 300 RTK 13 pagina's. Parachute system and circuit breaker

Pagina afdrukken

USER MANUAL

Installation of the parachute cradle :

In order to be able to position the parachutes on the drone you must:

Unscrew the two landing gear supports

Position the cradle in place and place the cradle under the drone. Fix it with the 4 screws on each

side (USB connector towards the front).

Installation of the pyrotechnic charges :

Before setting up the «parachute» containers, please

place the two pyrotechnic charges on each side of the

drone on the intended locations (landing gear base, red

connector). Place the load correctly thanks to the two

lateral lugs.

FLYSAFE-M3

INSTALLATION

In order to be able to lock the batteries with

the presence of the circuit breakers, it is neces-

sary to change the battery locking butterfly.

the push piece under the throttle valve to hold

it in place during disassembly.

throttle valve: CAUTION with the washers, re-

move the screw and the throttle valve.

valve, the washers and then screw.

Version 1.00

Hardware version 1.04

Installing the Battery Butterfly :

Place an adhesive tape on each side of

Unscrew the central screw of the

Replace the screw in the new butterfly

Remove the adhesive tape.

12/11/2020