Astro Pneumatic 129TW Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Astro Pneumatic 129TW. Astro Pneumatic 129TW 4 pagina's. Heavy duty air sabre saw
Ook voor Astro Pneumatic 129TW: Snelstarthandleiding (4 pagina's)

Pagina afdrukken
The oil and water extractor should not be mounted on or near the air
compressor.
The temperature of air is greatly increased during compression. As the air
cools down to room temperature, in the air line, on its way to the Air Power
Tool, the moisture contained in it condenses. Thus, for maximum
effectiveness, the oil and water extractor should be mounted at some point
Pitch pipe back toward air receiver
Compressor unit
Drain
Daily
129TW
SUGGESTED AIR LINE CONNECTION
PIPE SIZE, I.D. (Inches)
Air Flow
CFM
50
10
1/2"
20
3/4"
30
3/4"
40
1"
50
1"
70
1"
Oil and Water Extractor should be at least 25 ft. from the compressor. Further if possible.
HEAVY DUTY AIR SABRE SAW
- 10,000 STROKES PER MINUTE
PRODUCT INFORMATION:
• Ideal for body shop repair, muffler and exhaust work
• Adjustable blade guide increases blade life
• Cuts all types of aluminum, plastic,
fiberglass and sheet metal
• Cuts intricate shapes and tight radius curves
on flat and curved surfaces
• Conforms to CE standards
SPECIFICATIONS:
Cutting Capacity:
Stroke Length:
Strokes Per Minute:
Overall Length:
Net Weight:
Piston Stroke:
Air Inlet Thread NPT:
Air Hose I.D. Size:
Avg. Air Consumption:
Air Pressure:
in the air supply system where the temperature of the compressed air in the
line is likely to be lowest. Air lines must be properly drained daily. Each low
point in an air line acts as a water trap. Such points should be fitted with an
easily accessible drain. See diagram below. Pitch all air lines back towards
the compressor so that condensed moisture will flow back into the air
receiver where it can be drained off. Drain daily.
Install drain at
Length of Pipe (feet)
each low point
150
200
100
3/4"
3/4"
3/4"
3/4"
3/4"
1"
1"
3/4"
1"
1"
1"
1"
1"
1"
1-1/4"
1-1/4"
1"
25 FEET OR MORE
Page 3
3/32" (2mm) - Steel,1/8" (3mm) - Aluminum
3/8" (9.5mm)
10,000Bpm
9-1/4" (235mm)
1.54lbs. (0.7kgs)
1/4"
1/4"
3/8" (10mm)
6cfm (170L/Min)
90psi
Oil and Water
Extractor
Drain
Daily
Drain
Daily