Ametek Dito Snelstarthandleiding en veiligheidsinstructies - Pagina 9

Blader online of download pdf Snelstarthandleiding en veiligheidsinstructies voor {categorie_naam} Ametek Dito. Ametek Dito 17 pagina's.

AMETEK CTS

Before Activating the Equipment

3.1.

The instrument was tested before shipment and was packed carefully on a transport palette. Each box is

marked with a detailed list of the contents.

Before activating the equipment, check for damage which may have occurred during shipment. Check each

container as well as the generator itself. In case of physical damage, contact the manufacturer before operating

the unit.

ESD simulators are packaged in a plastic carrying case or cardboard box. These contain fitted foam, suitable for

safely holding the simulators during transport. These containers must be retained and used when shipping the

unit for calibration, repair or maintenance.

3.2.

Prior to turning the equipment on, check that the selected voltage corresponds to the supply voltage listed on

the bottom of the power supply or charger.

3.3.

Power to the instrument is provided through a universal mains unit suitable to your region. Ensure that your

mains power conforms to the label on the power supply. To charge, connect the provided charger to the bat-

tery.

Charging of the battery takes between two to four hours.

Quick Start and Safety Guide

V 1.0

ESD Simulators

9 / 17