Canon SCANFRONT M11058 Gebruikershandleiding - Pagina 18

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Canon SCANFRONT M11058. Canon SCANFRONT M11058 28 pagina's. Network scanner

Turning the Power ON and OFF

Use the power switch to turn the scanner ON, and press the [Power off] button on the touch panel to turn it OFF.

❏ Turning the Power ON

Press the power switch to turn the scanner ON. The power

indicator lights, and the Home screen or the login screen

appears.

Home screen

IMPORTANT

• It takes approximately 40 seconds for the Home screen to

appear after the power switch is turned on.

• If users have been registered, the login screen appears.

(Refer to "Login screen" on p. 6-4 of the ScanFront 220/220P

INSTRUCTIONS.)

• When the power indicator is lit but nothing appears on the

touch panel, Display Off has activated to turn the panel display

off. You can touch the panel to restore the display. (Refer to

"Display Off" on p. 4-25 of the ScanFront 220/220P

INSTRUCTIONS.)

• When the power indicator is flashing but nothing appears on

the touch panel, the Low Power mode has activated to

temporarily stop scanner operations. You can press the power

switch to switch out of Low Power mode. (Refer to "Low

Power Mode" on p.4-26 of the ScanFront 220/220P

INSTRUCTIONS.)

Power switch

Power

indicator

❏ Turning the Power OFF

Press the [Power off] button displayed at the bottom left of

the panel to turn the scanner OFF.

IMPORTANT

• When restarting the scanner, wait at least 5 seconds after

turning the power OFF before turning it ON again.

• If the scanner stops responding, press and hold the power

switch to shut down the system, and then press the power

switch to turn the scanner ON again. In such cases, settings

configured immediately before shutting down may be lost.