Canon 540EZ - Speedlite - Hot-shoe clip-on Flash Handmatig - Pagina 26
Blader online of download pdf Handmatig voor {categorie_naam} Canon 540EZ - Speedlite - Hot-shoe clip-on Flash. Canon 540EZ - Speedlite - Hot-shoe clip-on Flash 36 pagina's. Camera flash
Ook voor Canon 540EZ - Speedlite - Hot-shoe clip-on Flash: Instructieboek (32 pagina's), Onderdelencatalogus (12 pagina's), Instructieboek (37 pagina's), Gebruikershandleiding (4 pagina's), Instructieboek (32 pagina's)
Pagina afdrukken
1
Connect the flash units to the camera using the appropriate multi-
flash accessories.
2
After confirming that each flash unit is in the state described below,
take the picture.
(1) The ready lamp is lit.
(2) The flash mode is set to TTL (or A-TTL).
If the TTL Hot Shoe Adapter 3's built-in battery becomes depleted, the flash
charge completion signal will not be transmitted and the flash will not fire Be
sure to check the battery level of the TTL Hot Shoe Adapters before use. '
If a cord extension is necessary, up to three connecting cords can be connect¬
ed end-to-end for a maximum total length of 9m / 30ft.
If the flash units are set to manual mode, normal manual flash firing is possi-
Note 1:
Even if the A-TTL indicator is displayed in the LCD panel, the 540EZ will
operate in TTL mode.
Note 2:
If flash exposure compensation is set on the 540EZ, the flash exposure
compensation indicator will appear in the LCD panel but the flash output
will not actually be compensated. In multiple flash setups, flash exposure
compensation must be performed on the camera side.
Note 3:
Even if the second-curtain sync indicator is displayed in the LCD panel the
540EZ will operate in first-curtain sync mode.