Canon BCTV KH20x6.4 KRSD SY14 Bedieningshandleiding - Pagina 3
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Canon BCTV KH20x6.4 KRSD SY14. Canon BCTV KH20x6.4 KRSD SY14 6 pagina's.
Pagina afdrukken
BCTV Zoom Lens
Lenses
KKJ20x8.5B KRSD A
KH20x6.4 KTS SX14A
KJ20x8.5B KTS
KT20x5B KRSD A
KH20x6.4 KRSD SY14
KT20x5B KTS
OPERATION MANUAL Quick Guide
① Read "GENERAL SAFETY INFORMATION" (back side) before using the product. The safety
cautions must be observed.
② Read operation manual (this sheet and CD-ROM) before using the product. Keep the manual
in place for future reference.
Lenses
SPECIFICATION
Model Name
Size (W × H × L)
KRSD A
163.3mm×103.0mm×170.4mm
KJ20x8.5B
KTS
113.7mm×91.4mm×170.4mm
KRSD
163.3mm×103.0mm×182.5mm
KH20x6.4
KTS
113.0mm×90.0mm×182.5mm
KRSD A
163.3mm×103.0mm×171.2mm
KT20x5B
KTS
113.0mm×90.0mm×171.25mm
KRSD
165.4mm×105.1mm×211.7mm
KJ13x6B
KTS
115.8mm×95.5mm×211.7mm
KH13x4.5
KRSD
165.4mm×105.1mm×215.3mm
Contact us
Please contact us if you have questions on the products.
Canada: Canon Canada, Inc. Broadcast and Communications Div.
Tel:+1(905)795-2012
Fax:+1(905)795-2087
Mexico: Canon Mexicana, S. de R.L. de C.V. Call Center Div.
Tel:+52 55 5249 4905
USA : Canon U.S.A., Inc. ITCG METC
Tel:+1(800) 423-5367 (Toll Free)
Fax:+1(201) 807-3344
Asia and Hong Kong, S.A.R. : Canon Hongkong Company Ltd.
ICP Marketing Div.
Tel:+852-3191-2333
STEP 3 Adjustment before Operation
④ Back focus adjustment
If your lens is remote control type,
M
F
A
make sure to set the three auto/
M
Z
A
manual selecting switches to "M"
M
I
A
position.
IRIS GAIN
1. Select an object at an approprate distance
(20x: 2 to 5 meters, 13x: 1 to 3 meters). A
siemens star chart is preferable.
2. Set the iris fully open.
3. Set the lens to the telephoto end by turning
the zoom ring.
4. Bring the object into focus by turning the focus ring.
5. Set the lens to the widest angle by turning the zoom ring.
6. Loosen the flange back
Flange Back
lock screw, and turn the
Adjusting Ring
flange back adjusting ring
to bring the object into
focus.
7. Repeat steps 3 to 6 a few
times until the object is
brought into focus at both the widest angle and telephoto.
8. After making sure that the object is in sharp focus, tighten
the flange back lock screw.
⑤ Iris gain adjustment
(KRSD and KRSD A type)
1. Set the iris operation mode
change -over switch [for
KRSD and KRSD A type] or
the auto/manual iris selecting
switch [for KTS type] to "A"
(auto).
2. Turn over/ remove the rubber
cap which is attached here.
Iris Gain Adjusting Trimmer
3. Turn the iris gain adjust-
ing trimmer, using a small
screwdriver to set the level as
Clockwise
desired.
C.W. : higher sensitivity
(KTS type)
C.C.W. : lower sensitivity
4. After the iris gain adjust-
ment is completed, set it
based on the rubber cap
Rubber
Cap
turned over.
I.G.
Pub No. B-IM-20199F
For customers who purchased
KTS type lenses
For details of operation, see "Operations using a
remote controller" on back side.
For purchasing other accessories than shown right,
please contact your dealer or below.
KJ13x6B KRSD
KJ13x6B KTS
KH13x4.5 KRSD SY14
(See PDF Operation Manual for details.）
Weight
Focal
Zoom
Power
(Without
Length
Ratio
Source
Hood)
Approx.
1.27kg
8.5-170mm
Approx.
1.41kg
Approx.
1.27kg
6.4-128mm
20 x
Approx.
1.46kg
DC12V
Approx.
（DC10-
1.19kg
5-100mm
17V）
Approx.
1.33kg
Approx.
1.59kg
6-78mm
Approx.
13 x
1.73kg
Approx.
4.5-59mm
1.59kg
Korea : 캐논코리아 컨슈머 이미징 ( 주 ) 사업개발팀 프로솔루션파트
대표전화 : (82)2-2191-8500
South and Southeast Asia : Canon Singapore Pte. Ltd.
REG ICP Sales & Marketing Div.
Europe/Africa/Middle East : Canon Europe Ltd. Broadcast Products Div.
Tel:+44(0)20-8588-8140
Oceania: Canon Australia Pty. Ltd. CCI Div.
Tel:+61(0)2-9805-2000
STEP 4 Operation
⑳
⑬
⑦
⑤
Auto/Manual Focus
Selecting Switch
Auto/Manual Zoom
Selecting Switch
Auto/Manual Iris
Selecting Switch
⑯
①
Flange back
Lock Screw
⑰
⑲
⑧
① Zoom Operation Change-over Knob
② Zoom Ring / Zoom Lever
③ Zoom Rocker Seesaw
④ Focus Ring
⑤ Iris Operation Mode Change-over Switch
⑥ Iris Ring
⑦ Instant Auto-Iris Switch
Iris Operation Mode
Change-over Switch
⑧ Connector for Remote Zoom Control
⑨ Macro Ring / Macro Button
⑩ VTR Switch
⑪ RET Switch
⑫ Flange Back Lock Screw / Flange Back
Adjusting Ring
⑬ Iris Gain Adjusting Trimmer
⑭ Locating Pin
⑮ Power / Iris Control Cable
⑯ Hood
⑰ Hood Lock Knob
⑱ Shtl Button
⑲ Memo Switch
⑳ Dip Switch
Auto/Manual Iris
Selecting Switch
Iris Gain Adjusting
Trimmer
STEP 1 Check the Product List
Lens body
The shape of the lens body and attachments are
different by models. This illustration is an example
of KJ20x8.5B KRSD A.
Lens cap
Dust cap
KJ13x6B KTS, KJ13x6B
KRSD, KH20x6.4 KTS only
Hood cap
Hood
Current
Consumption
（12V DC in）
230 mA
435 mA
Operation manual
230 mA
• CD-ROM
435 mA
230 mA
435 mA
• Quick Guide (this sheet)
230 mA
435 mA
230 mA
팩스 : (82)2-2191-8576
Tel:+65-6799-8888
Fax:+44(0)20-8588-8929
Function
③
⑪
⑫
Manual
Zoom
⑭
⑨
Servo
⑥
②
④
Focus
Manual
Auto
Iris
Manual
Instant auto iris
(To obtain correct
exposure comtemporary.)
⑮
Macro shooting
(10mm min.)
⑩
Macro
Multi-point focus shooting
⑱
（The focal point is
shifted from foreground
to background.）
VTR
Recording ON/OFF
RET
Return video
STEP 5 Advanced Operation
Shooting
Shuttle between two
positions at Max speed
（* Preset required）
Shuttle Shot
Present position
Assign Shtl button
Allocation of
functions to the VTR or
Shtl function
RET switch
© 2015.05 CANON INC.
STEP 2 Mount and Connect
① Mount the hood
on the lens
If the lens cap is attached, please
remove the cap first.
1. Fit the hood on the front of
the lens barrel.
2. Align the index marks.
3. Turn the hood lock knob clock-
wise to tighten the hood securely.
Be sure to keep the caps in a safe
place so as not to lose them.
② Mount the lens on the camera
Before mounting the lens on the camera, make sure that the
camera's power is turned off.
1. Position the camera horizontally.
2. Turn the bayonet ring of the camera counterclockwise as
viewed from the lens. Remove the dust cap from the camera
mount.
3. Remove the dust cap from the
lens.
4. Align the locating pin on the lens
mount with the slot on the camera
mount, and fit the lens into the
camera mount surface.
5. Turn the bayonet ring clockwise
until the lens mount is firmly fixed
in place.
6. Connect the power/iris control cable
connector on the back of the drive
unit to the appropriate receptacle
on the camera head.
* For KTS type lenses
Connect an optional extension cable to the control cable of the
back side of the lens drive unit. Then connect the cable to the
connector on the optional remote controller.
③ Turn it on
Turn on the camera, and the power of the lens will be supplied.
Switch
Operation
Ring
Knob
Set the knob ① to "MANU" position.
↓
Turn the zoom ring ② (or with the zoom lever).
①
NOTE
②
Set the zoom operation change-over knob ① to "MANU"
without fail before this operation. Failure to do so may
result in malfunctioning.
Set the knob ① to "SERVO" position.
①
↓
Press the zoom rocker seesaw ③. The zoom speed
③
changes according to how far down the switch is pressed.
④
Turn the focus ring ④.
Set the change-over switch ⑤ to "A" position.
The iris ring rotates automatically so that the video signal
⑤
is kept at a constant level by the signals sent from the
camera side. Make sure that the camera is also set to the
automatic iris operation.
Set the change-over switch ⑤ to "M" position.
↓
Turn the iris ring ⑥.
⑤
NOTE
⑥
Set the iris operation change-over switch ⑤ to the "M"
without fail before this operation. Failure to do so may result
in malfunctioning.
Press the instant auto-iris switch ⑦.
⑦
(Automatic mode while the SW is held down)
Set to the widest angle.
↓
⑨
While holding the button ⑨ down, turn the ring
to bring the object into focus.
Zoom in by normal focus operation.
④
Zoom out to a near object by macro operation.
Zoom in by normal focus operation.
⑨
↓
Turn the zoom ring/lever ② from the widest angle
②
to telephoto.
Press the switch ⑩ to start recording,
⑩
and press it again to stop.
While switch ⑪ held down, mian frame picture can be
⑪
seen in the viewfinder. (Multiple camera system used)
Switch
Operation
Knob
⑳
Dip switch ⑳ 1 : ON
* How to set the shuttle position
⑱
While holding the button ⑱ down, press the button ⑲.
⑲
As viewed from the camera, CW : to telephoto CCW : to widest angle
Hold the button ⑱ down → Move to the memory position at max. speed
⑱
Release the button ⑱ → Return to the original position at max. speed
(See figures below)
Shtl
Shtl
button is
button is
released
held down
Max speed
Max speed
Shuttle position
Assign to VTR switch → Dip switch ⑳ 2 : OFF, 3 : ON
⑳
Assign to RET switch → Dip switch ⑳ 2 : ON, 3 : OFF
Index Mark
Hood
Lens Barrel
Hood
Hood Lock Knob
VTR
Locating Pin
Power/Iris
Control Cable
Bayonet Mount Ring
Camera
Operating direction
As viewed from the camera
CW : to Widest angle
CCW : to Telephoto
"W" : to Widest angle
"T" : to Telephoto
CW : to Near
CCW : to Far
CW: to CLOSE
CCW: to OPEN
Clockwise
Original position
3/6