Cojali Jaltest SST Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cojali Jaltest SST. Cojali Jaltest SST 15 pagina's. Speed sensor tester

1.3 EQUIPMENT COMPOSITION

Jaltest SST is made up of an

electronic

device

operating interface with a button

and LEDs, as well as a complete

kit of cables and multipins that

allow connection in the sensor

and ECU connector pins. It has

a 9 V alkaline battery type 6LR61.

1. On/Off & mode change button

This mode allows the user to

interact with the device (see

details in the

Function table

page 6). There are 3 press types:

• Short press (less than 1 s): It

selected, it carries out a specific

• Long press (between 1 s and 3 s):

it returns to start

mode.

• Extra-long press (more than 3 s):

2. Error detection

A red LED lights up if an open circuit, short circuit, or power supply problem is

detected.

3. Sensor type

A green LED indicates whether an active or passive sensor is being read or simulated.

4. Low Battery

A red LED lights up if the battery is too low.

5. Simulation LEDs and signal status

In simulation/read mode, 4 green LEDs flash sequentially clockwise, indicating that

the signal is being simulated/read.

6. Connections

3 banana female connectors. The connection positions; power supply (red), signal

(blue), and ground (black) are indicated in the upper part of the control panel.

with

changes mode

action

of the mode (see

It selects the desired

It turns off the device.

when no mode is selected. If a mode is

Function table

mode. If a mode is already selected,

English

on page 6).