Canon EF600mm f/4L IS II USM Gebruiksaanwijzing - Pagina 19

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Canon EF600mm f/4L IS II USM. Canon EF600mm f/4L IS II USM 29 pagina's. High-performance super-telephoto lense
Ook voor Canon EF600mm f/4L IS II USM: Gebruiksaanwijzing (22 pagina's), Gebruiksaanwijzing (24 pagina's), Gebruiksaanwijzing (23 pagina's), Gebruiksaanwijzing (23 pagina's)

Canon EF600mm f/4L IS II USM Gebruiksaanwijzing
Tips on Using Image Stabilization
The Image Stabilizer cannot compensate for a
O
O
blurred shot caused by a subject that moved.
The Image Stabilizer might not be fully effective
O
O
in the following conditions:
• Large shake or fast vibration
• Panning in MODE 1
Setting the STABILIZER switch to ON consumes
O
O
more power than when OFF.
The Image Stabilizer operates for about two seconds
O
O
even when your finger is off the shutter button. Do
not detach the lens while the stabilizer is in operation.
Detaching the lens at this time will cause a malfunction.
Although image stabilization will operate when using a tripod,
O
O
depending on the kind of tripod and shooting conditions,
sometimes it may be better to turn off the Image Stabilizer.
Although image stabilization will operate when using
O
O
a monopod, depending on the shooting conditions,
sometimes the Image Stabilizer might not be fully effective.
Setting the STABILIZER switch to OFF is
O
O
recommended when you are taking pictures using the
Bulb setting (long exposures). If the STABILIZER switch
is set to ON, the Image Stabilizer may introduce errors.
With the EOS-1V/HS, 3, ELAN 7E/ELAN 7/30/33, ELAN
O
O
7NE/ELAN 7N/30V/33V, ELAN II/ELAN II E/50/50E,
REBEL 2000/300, IX, IX Lite/IX7, and D30, the Image
Stabilizer will not work during self-timer operation.
Depending on the camera there may be image
O
O
shake, such as after releasing the shutter.
However, this does not affect shooting.
If you set the camera's Custom Function to
O
O
change the AF button assignment, the Image
Stabilizer will operate when you press the newly
assigned AF button.
ENG-18