Canon XJ80x8.8B Bedieningshandleiding - Pagina 16

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Canon XJ80x8.8B. Canon XJ80x8.8B 44 pagina's. Bctv zoom lens

Pagina afdrukken

2 PREPARATION

Trimmer Adjustment

(Excluding UJ122x8.2B AF)

Remove the lens shroud from the lens body.

Check that DIP switch (iris control select switch) SW2

No. 4 is set to the "OFF" position (I.CAMERA).

Depending on the command signals from the camera,

the iris would not be set to auto iris mode although

the switch was set to the "OFF" position. For details,

refer to the "Iris mode" table in 2-5 "Iris Mode Setting

(Option)".

Turn the iris gain adjusting trimmer for the gain

adjustment. To increase the gain, turn the trimmer

clockwise. To decrease the gain, turn the trimmer

counterclockwise.

Iris Gain Adjusting Trimmer

DIP1

DIP2

• UJ122x8.2B, UJ111x8.3B

• Models with the IESDA

operation system

Making Adjustments on the

Information Display

Information display operation procedure:

a. Push the DISPLAY switch to bring up the display.

Push the

to place the cursor over "Setting".

Push the

VR2100

SW2

SW1

DIP Switch

Other models

<Top>

Status

（a）

Setting

Support

b. Push the

to place the cursor over "I-Gain".

I G :

I-Gain:

（b）

RBF:

System

c. Move the

(left) or

the value to be set appears on the screen.

Selection item

Function

NOTE

• To perform the gain adjustment while checking the iris

operation, set the iris mode of the camera to the [AUTO]

position.

• To determine the maximum gain, set the trimmer at a level

where no hunting occurs.

For the detailed setting method, refer to the "Display

Operation Manual".

Information Display

DISPLAY

switch

Cursor

button

E10

5 0

000

(right) cursor button until

–

Minimum gain

Maximum gain

Default value: 50