COLDBUSTER FLOORHEATING Timber Installatiehandleiding - Pagina 4

Blader online of download pdf Installatiehandleiding voor {categorie_naam} COLDBUSTER FLOORHEATING Timber. COLDBUSTER FLOORHEATING Timber 16 pagina's.

Pagina afdrukken

Product Information

Coldbuster Under Tile & Timber Floor Heaters Consist of 2 Components:

• Heating element mounted on self-adhesive fibreglass mesh

• 3.0m cold tail.

Coldbuster Under Tile & Timber Heater Kits Contain:

• Heater, consisting of:

o Heating element mounted on self-adhesive fibreglass mesh

o 3.0m cold tail

• Installation Alarm Monitor

• Installation Manual

The Heating Element is Made Up of 4 Parts:

Tools Required for Heater Installation

• Tape Measure

• Pencil or Crayon

• Cloth/Duct Tape or Glue Gun

• Chisel and Hammer or Angle Grinder

• Bonding Liquid

• To be used where heaters need to be covered for protection:

o Tile Adhesive

o Large Bucket and Mixing Paddle

o Steel Float (with rounded corners) to apply adhesive

• For under engineered/natural timber, vinyl or laminate heating installation:

o Coldbuster recommends a 10-15mm sand cement screed or liquid leveller to be laid over the

heating

For timber flooring, most timber manufacturers require a medium between the element

& the timber flooring

For Vinyl, this ensures a nice smooth finish