Coldtainer F0140/FDN Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Coldtainer F0140/FDN. Coldtainer F0140/FDN 16 pagina's.

F0760/NDN, F0760/NDH, F0915/NDN, F0915/NDH.

•

12Vdc only:

T0082/XFDN, F0330/XFDN, F0720/FDN, F0720/FDH, F0760/FDN,

F0915/NDN, F0915/NDH, F0915/FDN, F0915/FDH, F1340/NDN, F1340/NDH,

F1640/NDN, F1640/NDH.

(In case of intended connection of above models to a 24V system always use

a DC/DC 24V to 12V voltage converter of proper Ah capacity. Over voltages

can damage the electronics.)

The 12Vdc nominal value means a voltage, measured at the terminals of the

electronic of the compressor from 9,6Vdc to 17,0Vdc.

The 24Vdc nominal value means a voltage, measured at the terminals of the

electronic of the compressor from 21,3Vdc to 31,5Vdc.

ConneCtors

fridge side

On all units quality Anderson Power DC input connectors are used.

•

single DC red AP connector: T0022/FDN, T0022/FDH, T0032/FDN, T0032/FDH:

•

two AP connectors, one red and one yellow: all other models. The red AP

connector is for the DC cord connection (12-24Vdc or 12Vdc only, according to

specific model data); the yellow AP connector is 12Vdc only, for connection to

an external AC-DC power supply (see specific voice hereunder).

Cords

A proper DC cord is included in the package of each fridge. The wires of the

included DC cord are of the right cross section requested for a proper operation

of the electronic. To prevent voltage drops and power losses, do not interrupt the

cord and avoid additional extensions, switches, plugs or socket strips.

The direct connection to the + and – terminals of the battery of the vehicle will

not interfere with the electric and/or network system with the vehicle itself. The

electronic of the compressors are protected against reverse polarity. See technical

data sheet for indication of DC cord provided in the scope of delivery of specific

versions.

On T0022/FDN, T0022/FDH, T0032/FDN, T0032/FDH a 2,5 mt DC cord with

cigarette plug is included (item 540010/01), to allow an easy use also on board of

passenger cars.

The cigarette plug is provided with sliding stoppers to be pushed inside the

12V outlet of the car to maintain a stable electrical connection. In case a direct

connection to the battery of the vehicle would be preferred, the 5 meter DC cord

to order is item 540011/01.

IMPORTANT: The DC cord 540010/01 with cigarette plug cannot be used with

other models, wires (included ones of onboard 12V outlets) are not of right size and

Ah capacity.

ireCt ConneCtion to a

Connect the DC cord to the Coldtainer (red AP connectors) from one side and

battery