Daedalus Sparrow Handmatig - Pagina 4

Blader online of download pdf Handmatig voor {categorie_naam} Daedalus Sparrow. Daedalus Sparrow 20 pagina's. Spinning wheels

pulley are properly aligned directly underneath the appropriate whorl,

because it may have shifted a little during shipping.

To do so, check the pinion pulley (the groove that holds your drive

band) on the front of the motor. It should be located directly below

the belt groove on the flyer above. Verify that the drive belt is parallel

to the front frame by observing it from the side. Use your thumbs

to adjust the position of the motor mount as necessary. If the motor

mount feels too tight to move, push one side downward until it pops

off the carbon tube.

Scotch Tension Basics

Our wheels ship out in Scotch Tension. When using your Sparrow in

Scotch tension, the motor will be facing forward and the pinion pulley

will have just enough space between it and the front frame to slip the

rubber drive belt in front of it. Viewing from the side will verify that

the drive belt is parallel to the adjacent front frame.

The tension belt is likely already in place, but humidity changes can

drastically affect the length of the rat tail (aka the tension belt). The

goal is to have the Right Tension Dial (1) adjusted into the middle of its

adjustment range, with no slack in the tension belt and no expansion