Asus A58M-E Handmatig - Pagina 23
Blader online of download pdf Handmatig voor {categorie_naam} Asus A58M-E. Asus A58M-E 47 pagina's.
Ook voor Asus A58M-E: Gebruikershandleiding (47 pagina's)
Pagina afdrukken
4.
Serial ATA 3.0 Gb/s connectors (7-pin SATA3G 1~6)
These connectors are for the Serial ATA 3.0 Gb/s signal cables for Serial ATA hard
disk drives and optical disc drives. If you installed Serial ATA hard disk drives, you can
create a RAID 0, RAID 1, or RAID 10 configuration through the onboard controller.
A58M-E
A58M-E SATA 3.0Gb/s connectors
•
These connectors are set to AHCI mode by default. If you intend to create a Serial ATA
RAID set using these connectors, set the type of the SATA connectors in the BIOS to
[RAID].
•
You must install Windows
ATA hard disk drives. The Serial ATA RAID feature is available only if you are using
Windows
•
When using hot-plug and NCQ, set the type of the SATA connectors in the BIOS to
[AHCI].
5.
Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port.
A58M-E
A58M-E Digital audio connector
The S/PDIF module is purchased separately.
ASUS A58M-E
SATA3G_1
SATA3G_2
XP Service Pack 3 or later version before using Serial
®
XP SP3 or later version.
®
SPDIF_OUT
SATA3G_6
GND
RSATA_RXP6
RSATA_RXN6
GND
RSATA_TXN6
RSATA_TXP6
GND
SATA3G_5
GND
RSATA_RXP5
RSATA_RXN5
GND
RSATA_TXN5
RSATA_TXP5
GND
SATA3G_4
GND
RSATA_RXP4
RSATA_RXN4
SATA3G_3
GND
RSATA_TXN4
RSATA_TXP4
GND
1-15