Asus A88XM-E/USB 3.1 Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Asus A88XM-E/USB 3.1. Asus A88XM-E/USB 3.1 36 pagina's.

CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin

CHA_FAN)

Connect the fan cables to the fan connectors on the

motherboard, ensuring that the black wire of each cable

matches the ground pin of the connector.

Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside

the system may damage the motherboard components. These are not jumpers! Do not

place jumper caps on the fan connectors! The CPU_FAN connector supports a CPU fan

of maximum 1A (12 W) fan power.

AMD® FM2+ APU socket

This motherboard comes with a FM2+ socket designed for AMD® A‑series and

Athlon™Series processors.

For more details, refer to Accelerated Processing Unit (APU).

DDR3 DIMM slots

Install 2 GB, 4 GB, 8 GB, and 16 GB unbuffered non‑ECC DDR3 DIMMs into these

DIMM sockets.

For more details, refer to System memory.

AMD

A88X SATA 6.0Gb/s ports (7-pin SATA6G_1~6)

These ports connect to SATA 6.0 Gb/s hard disk drives via

SATA 6.0 Gb/s signal cables.

When using hot‑plug and NCQ, set the SATA Mode

Selection item in the BIOS to [AHCI].

Speaker connector (4-pin SPEAKER)

The 4‑pin connector is for the chassis‑mounted system warning

speaker. The speaker allows you hear system beeps and

warnings.

ASUS A88XM-E/USB 3.1

CHA_FAN

CPU_FAN

SATA6G

GND

RSATA_TXP

RSATA_TXN

GND

RSATA_RXN

RSATA_RXP

GND

SPEAKER

PIN 1

1‑3