Asus AM1I-A Handmatig - Pagina 20

Blader online of download pdf Handmatig voor {categorie_naam} Asus AM1I-A. Asus AM1I-A 20 pagina's.

Keyboard and Mouse wake-up (KBMSPWR)

Set this jumper to +5V to wake up the computer from S1 sleep mode (CPU stopped,

DRAM refreshed, system running in low power mode) using the connected keyboard

or mouse. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU,

DRAM in slow refresh, power supply in reduced power mode).

AM1I-A Keyboard & Mouse wakeup

The total current consumed must NOT exceed the power supply capability (+5VSB)

whether under normal condition or in sleep mode.

USB device wake-up (USBRPWR, USBPWR5~8)

These jumpers allow you to enable or disable the USB device wake-up feature. When

you set this jumper to pins 2-3 (+5VSB), you can wake up the computer by pressing a

key on the USB keyboard or by clicking on the USB mouse. This feature requires an

ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding

setting in the BIOS.

AM1I-A USB device wakeup

The USB device wake-up feature requires a power supply that can provide 500mA on the

1-12

KBMSPWR

1 2

2 3

+5VSB

+5V

(Default)

USBRPWR

2 3

+5VSB

+5V

(Default)

USBPW5-8

2 3

+5VSB

+5V

(Default)

Chapter 1: Product introduction