Dorex DX2 FW Handleiding voor installatie-instructies - Pagina 8

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Dorex DX2 FW. Dorex DX2 FW 16 pagina's.

11. INSTALL TOP LATCH AND ROD (CONTINUED)

Rod

Connecting

Bar

Connecting

Screw

3. Attach the connecting Bar to the bottom of the top

rod with supplied screw (Figure 3)

12. CHECK TOP LATCH FOR HOLDBACK AND DEADLOCK

Adjustment Screw

1. Pushing on push bar will retract the latchbolt and

allow the door to open. Latchbolt will stay

retracted, if not adjust the screw on top of the

retractor with a screw driver.

Connecting

Screws

Connecting

Bar

Notch

Rod

Tab

NOTE:

Match notch of the connect-

ing link with tab of rod before

tighten connecting screw

Figure 3

Rod

Guide

Top

Latch

4. Assemble rod guide with rod, thread rod into top latch until first

hole in connecting bar align with first hole in retractor and

fasten with side screws.

2. Once the door is closed the strike will engage with the deadlock, which

will allow the latchbolt to engage inside the strike. The latchbolt cannot

be retracted when the door is closed. If not, adjust the strike position to

engage with the device deadlock.

8 / 16

Connecting

Bar

Second

Holes

Side

Screws

First Holes

Open