Asus AT5NM10-I Gebruikershandleiding - Pagina 22

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Asus AT5NM10-I. Asus AT5NM10-I 43 pagina's. User manual

Serial ATA connectors (7-pin SATA1, SATA2)

These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s hard disk

drives and optical disk drives. The Serial ATA 3Gb/s is backward compatible with the

Serial ATA 1.5Gb/s specification. The data transfer rate of the Serial ATA 3Gb/s is faster

than the standard parallel ATA (133 MB/s).

Install the Windows

USB connector (10-1 pin USB56, USB78)

These connectors are for USB 2.0 ports. Connect the USB module cable to this

connector, then install the module to a slot opening at the back of the system chassis.

This USB connector complys with USB 2.0 specification that supports up to 480 Mbps

connection speed.

Never connect a 1394 cable to the USB connector. Doing so will damage the motherboard!

The USB module cable is purchased separately.

1-13

E5179_AT5NM10-I.indb 13

XP Service Pack 2 or later versions before using Serial ATA.

Chapter 1: Product introduction

12/22/09 5:56:01 PM